Dbox2 Sagem 2x Intel kein flash

Diskutiere Dbox2 Sagem 2x Intel kein flash im Heimkino, Receiver, Satelliten- & Digitaltechnik Forum im Bereich Technik & Wissen; Hallo zusammen! ich habe ein Problem mit meine Dbox2 Sagem. zeigt mir kein System, wenn ich versuche neu zu flashen, dann geht los, aber nur bis...
  • Dbox2 Sagem 2x Intel kein flash Beitrag #1
M

Mrright

Neues Mitglied
Dabei seit
29.02.2008
Beiträge
4
Reaktionspunkte
0
Hallo zusammen!
ich habe ein Problem mit meine Dbox2 Sagem.
zeigt mir kein System, wenn ich versuche neu zu flashen, dann geht los, aber nur bis backup schreiben, dann kommt die Meldung löschen der Image Fehler!!
ich weiß nicht weiter kann mich jemand da helfen??
für eine hilfe werde ich euch dankbar!!


Mfg Mrright
 
  • Dbox2 Sagem 2x Intel kein flash Beitrag #2
Syrinx

Syrinx

Bekanntes Mitglied
Dabei seit
27.03.2000
Beiträge
1.594
Reaktionspunkte
0
Ort
.bw
hi Mrright,

nochmal zum ablauf: du schreibst ein neues image auf den flash, die box startet neu und dann steht im display "kein system"?

cheers
 
  • Dbox2 Sagem 2x Intel kein flash Beitrag #3
M

Mrright

Neues Mitglied
Dabei seit
29.02.2008
Beiträge
4
Reaktionspunkte
0
Hallo cheers!

nein die Box lässt sich nicht mehr flashen, ich versuche eine neu Image drauf zu spielen, und dbox2 fängt an macht ein Backup, aber dann, kommt zum Image löschen, und genau da bricht ab, und kommt die Meldung löschen Fehler!! und danach beim neu start kommt kein system! ich denke mal das vielleicht der Speicher kaputt ist?? oder kannst du mir mehr dazu sagen?


Mfg Mrright
 
  • Dbox2 Sagem 2x Intel kein flash Beitrag #4
BioaSharky

BioaSharky

Super-Moderator
Teammitglied
Dabei seit
25.01.1999
Beiträge
18.511
Reaktionspunkte
9
Wenn du mal ein Flashlog posten würdest, vielleicht.
Meine Glaskugel habe ich leider verlegt und das Orakel hat Osterurlaub. ;)
 
  • Dbox2 Sagem 2x Intel kein flash Beitrag #5
M

Mrright

Neues Mitglied
Dabei seit
29.02.2008
Beiträge
4
Reaktionspunkte
0
PÃ  õ  &Text     õ  &OEM Text idebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:3c:40:7a
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.20, My IP 192.168.178.202
debug: Sending TFTP-request for file D/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'D/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'D/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1  0

Bank # 1: INTEL 28F640J3A (64M), 16 bit

Size: 8192 kB in 64 Sectors
Sector Start Addresses:
10000000 10020000 10040000 10060000
10080000 100A0000 100C0000 100E0000
10100000 10120000 10140000 10160000
10180000 101A0000 101C0000 101E0000
10200000 10220000 10240000 10260000
10280000 102A0000 102C0000 102E0000
10300000 10320000 10340000 10360000
10380000 103A0000 103C0000 103E0000
10400000 10420000 10440000 10460000
10480000 104A0000 104C0000 104E0000
10500000 10520000 10540000 10560000
10580000 105A0000 105C0000 105E0000
10600000 10620000 10640000 10660000
10680000 106A0000 106C0000 106E0000
10700000 10720000 10740000 10760000
10780000 107A0000 107C0000 107E0000
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
##
done
Bytes transferred = 675073 (a4d01 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 675009 Bytes = 659.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
<0>Rebooting in 180 seconds..
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: SiS190 100/10 Ethernet Device - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.178.20
IP-Adresse die die dbox bekommt: 192.168.178.202
Comport: Kommunikationsanschluss (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) 64 Processor 3800+ @ 2400 MHz
Dateiname des Images: Keywelt_V1_Februar_1x_SQUASHFS_2008.img
Imagetyp: Ein Flash
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------  idebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:3c:40:7a
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.20, My IP 192.168.178.202
debug: Sending TFTP-request for file D/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'D/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'D/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1  0

Bank # 1: INTEL 28F640J3A (64M), 16 bit

Size: 8192 kB in 64 Sectors
Sector Start Addresses:
10000000 10020000 10040000 10060000
10080000 100A0000 100C0000 100E0000
10100000 10120000 10140000 10160000
10180000 101A0000 101C0000 101E0000
10200000 10220000 10240000 10260000
10280000 102A0000 102C0000 102E0000
10300000 10320000 10340000 10360000
10380000 103A0000 103C0000 103E0000
10400000 10420000 10440000 10460000
10480000 104A0000 104C0000 104E0000
10500000 10520000 10540000 10560000
10580000 105A0000 105C0000 105E0000
10600000 10620000 10640000 10660000
10680000 106A0000 106C0000 106E0000
10700000 10720000 10740000 10760000
10780000 107A0000 107C0000 107E0000
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
##
done
Bytes transferred = 675073 (a4d01 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 675009 Bytes = 659.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
<0>Rebooting in 180 seconds..
------ Zusatzinformationen ------
Gew„hlter Netzwerkadapter: SiS190 100/10 Ethernet Device - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.178.20
IP-Adresse die die dbox bekommt: 192.168.178.202
Comport: Kommunikationsanschluss (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) 64 Processor 3800+ @ 2400 MHz
Dateiname des Images: Keywelt_V1_Februar_1x_SQUASHFS_2008.img
Imagetyp: Ein Flash
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------
 
  • Dbox2 Sagem 2x Intel kein flash Beitrag #6
BioaSharky

BioaSharky

Super-Moderator
Teammitglied
Dabei seit
25.01.1999
Beiträge
18.511
Reaktionspunkte
9
  • Dbox2 Sagem 2x Intel kein flash Beitrag #7
M

Mrright

Neues Mitglied
Dabei seit
29.02.2008
Beiträge
4
Reaktionspunkte
0
hallo und wieso kein support?? tja mehr bekomme ich leider nicht, von der box
 
  • Dbox2 Sagem 2x Intel kein flash Beitrag #8
BioaSharky

BioaSharky

Super-Moderator
Teammitglied
Dabei seit
25.01.1999
Beiträge
18.511
Reaktionspunkte
9
hallo und wieso kein support?? ...

Weil das ein Image ist mit eingebautem Emulator für illegales Schauen von PayTV. Dies wird von uns hier nicht supportet. Dann wende dich an das Keyteam.
 
Thema:

Dbox2 Sagem 2x Intel kein flash

ANGEBOTE & SPONSOREN

https://www.mofapower.de/

Statistik des Forums

Themen
213.179
Beiträge
1.579.170
Mitglieder
55.874
Neuestes Mitglied
hnte
Oben