Hallo,
habe auch kleines problem und schliesse mich diesem treat mal an.
Habe altes Linux File auf der box. wollte jetzt neues flashes aber box nimmt neues file nie an und bootet immer bei reset bzw stecker rein das alte file rein.
LOG: ->
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-0d.d1.00.07.00.00-9e
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0028
will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Warning: CPU Core has Silicon Bugs -- Check the Errata
Board: DBox2, Nokia -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: ......... done.
### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd'
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb'
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf'
### FS (jffs2) loading 'vmlinuz'
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647997 Bytes = 632.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (tuxbox@suse) (gcc version 3.2.3) #4 Mon Sep 22 00:12
:57 CEST 2003
Jffs2-only Skars-Kernel mit NFS-Support folgender Aufteilung:
128k BR bootloader, 128k flfs( ppcboot ), 7936k root( jffs2 )
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30832k available (1100k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (
[email protected])
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:15:29:6b
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.00-pre3 (2003.11.01-13:14+0000) multi-cUsing /lib/modu
les/2.4.22-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.22-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.22-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
Using /lib/modules/2.4.22-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.22-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
Using /lib/modules/2.4.22-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
Using /lib/modules/2.4.22-dbox2/misc/cam.o
$Id: cam.c,v 1.28 2003/10/16 08:44:10 alexw Exp $
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
DBox2 CAM und Multicam Serial Port Driver. Skars
Using /lib/modules/2.4.22-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.22-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.16 2003/07/24 01:59:22 homar Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
[LCDFONT] initializing core...Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi
.o
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.22-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.79 2003/10/16 08:42:20 alexw Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.11 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.43 2003/10/08 19:54:24 obi Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.189 2003/10/25 15:45:34 wjoost Exp $
avia_gt_dmx: loaded ucode v001A
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.37 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.28 2003/09/30 05:45:35 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
CAM: unsure length, reading again.
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_proc.o
avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2003/09/25 12:24:00 Skars & Merandos
Exp $
avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension
options:
(demux reinit) enx_reset=1
(framer chan.) fc_reset=1
(clr avia reg) avia=0
(enx td trace) trace=0
(lock, unlock) spinlock=0
Schreiben ueber avia_gt.o
(delay) delay=10
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.51 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.23 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Vendor: 1
Model: Nokia
Using /lib/modules/2.4.22-dbox2/misc/ves1820.o
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.22-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.22-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.25 2003/09/12 03:01:51 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.188 2003/09/30 05:45:35 obi Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $
$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
$Id: zapit.cpp,v 1.332emu 2003/11/03 21:03:01 Streamboard Exp $
Imageversion in Ordnung
[zapit] Using EMU ...
avia_gt_core: masking unhandled irq reg 0 bit 7
$Id: controld.cpp,v 1.110 2003/10/21 22:48:25 zwen Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNGEMU $Id: neutrino.cpp,2003/11/03 Streamboard Exp $
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
Freue mich über alle TIPs, danke.